Guide visitors to your doorstep and around your outdoor spaces using colourful handmade lanterns
Words and photography by Sarah Heeringa
These lanterns are easy to make using upcycled jars and tins, and their high sides help them stay alight on the stormiest of evenings.
For the jars
Use your scissors to cut the clear acetate into stars or other simple shapes and stick these firmly to the inside of the jars. Pour a small amount of metallic paint into each jar and swirl it around. I used Resene Stun. The paint will naturally run off the sides to the bottom of the jar so you may need to swirl it around the inside of the jar a number of times before it dries. For extra streaks, turn the jar upside down onto a sheet of newspaper to drain. Once the paint is fully dry, carefully remove the acetate sticker. To hang your jars, bend wire around the rim of the jar and twist together. Add a handle by looping a second short wire through and twisting each end to secure. Drop a tea light into the bottom of the jar and light it using a long candle.
For the tins
Fill a tin with firmly packed sand. Tape over the top using gaffer tape. Mark a pattern on the outside of the tin using your felt pen. Lay the tin on its side and while holding the tin secure (I used my feet to do this!) punch or drill a series of holes. Drill two holes at the top of the tin where you want to attach a wire handle. Empty out the sand and wash the tin. Add the handle by looping the wire through the two top holes and twisting the ends to secure. Coat with Resene Quick Dry waterborne primer undercoat. Once the paint is fully dry, top coat with a Resene metallic paint in a shade of your choice. I used Resene Gold Dust. When dry, drop a tea light into the bottom of the tin and light it using a long candle. Take care and blow the candles out at the end of the night
For more inspiration from Resene, visit resene.co.nz